980nm High Power Semiconductor Laser System-2000W
Parameter (25℃)
Typical | Unit | |||
Optical | ||||
Output Power | 2000 | W | ||
Power Range | 10-100 | % | ||
Center Wavelength | 980±10 | nm | ||
Output Power Instability | <3%@24h | |||
Aiming Beam | ||||
Center Wavelength | 650 | nm | ||
Power | 2-5 | mW | ||
Electrical | ||||
System Input AC Voltage | 220 | V | ||
Input Power | 5 | kW | ||
Fiber | ||||
Core Diameter | 400 | μm | ||
Armor Outer Diameter | 13 | mm | ||
NA | 0.22 | |||
Fiber Length | 5(Customizable) | m | ||
Fiber Connector | QBH | |||
Cooling | ||||
Cooling Mode | Water | |||
Water Cooling Parameter | ||||
Temperature | 20 | ℃ | ||
Cooling Water Flow | 10-12 | L/Min | ||
Cooling Water Input Pressure | 0.3 | MPa | ||
Outer Diameter of Water Pipe | 12 | mm | ||
QBH Cooling Water Flow | 2 | L/Min | ||
Working Pattern | ||||
Control Mode | RS-485 Serial Mode | |||
AD Control mode 0-10VAnalog Control | ||||
Modulation Mode | Continuous |
Operating environment and working conditions
Min |
Max |
Unit |
|
Operating Temperature |
5 |
40 |
℃ |
Operating Relative Humidity |
- |
75 |
% |
Storage Temperature |
-20 |
80 |
℃ |
Storage Relative Humidity |
- |
90 |
% |
Dimensions (mm)
Our workshop
Certificate
Write your message here and send it to us